Excellent Quality Hopper Scale Chain Plate Feeder

• Customization: Available
• After-sales Service: Support on-Site Installation
• Warranty: 12 Months
• Model NO.: SCS
• Structure: Mechanical and Electrical Scale
• Display Type: LCD
• Sensor: Digital Scale
• Installation: Weighbridge
• Automation: Automation
• The Weighing Method: Dynamic Weighbridge
• Scale Structure: U-Type Steel
• Operating Environment: Non Explosion Proof Loadometer
• Lightning Protection: With Lightning Protection
• Max Weighing: 10t
• Graduation Value: ≤5K
• Measure Method: Automatic
• Accuracy: III
• Transport Package: Packing in 20gp or 40gp Container
• Specification: CE, SGS, ISO9001: 2008
• Trademark: Keda
• Origin: Quan Zhou, Fujian, China
• HS Code: 8423891090
• Production Capacity: 100sets/Month
• Package Size: 750.00cm * 500.00cm * 300.00cm
• Package Gross Weight: 7500.000kg

Product Description

    II. Principle of operation
The dosage setting of the feeder is combined with the actual situation of the site. When working, under the control of dosage controller, the meter will automatically tare and clear, open the first material mechanism for feeding, the material continuously into the preparation bin, the pressure sensor will be converted into the weight of the corresponding electrical signals sent to the controller, the controller in the display window to show the value of the weight of the material and the corresponding instructions, and according to the pre-set parameters sequentially output a variety of control signals, so that the loader to fast, slow two kinds of speeds Continuously to the measuring hopper charging, complete a variety of materials accurate charging (at the same time, each material can be realized between the delay control), and in the completion of the end of the charging of all materials, the display window shows the total quantitative value of the dosage; the end of the process of charging, start the feeder, the material along the conveyor chain plate or conveyor belt running continuously transferred to another conveyor belt. Until all the materials in the preparation bin have been conveyed, a dosage cycle is finished, and it enters into the next dosage cycle.
Manual batching: forklift to the hopper to add a material, the display shows the weight of the material added in time, when a certain material added to the amount needed to stop adding; for another batching to add, the display shows the cumulative weight, when the forklift driver from the large display to know that the material added to the place, and then the addition of the third material added ..... and so on. If the dosage is very fast, the feeder can dosage while conveying.
The weighing control system adopts powerful embedded industrial control instruments, integrating programmable control as a whole, accurately and quickly realizing various complex controls with strong anti-interference performance and high reliability. Modular design, reasonable control mode, excellent quality parts and strict performance test make this product has excellent working performance.

III. Main product configuration and technical parameters

Serial No.	Name	Model No.	Quantities
1	Racks, silos	15-60t(can be customized)	1 set
2	Transmission Mechanisms	Chain plate, drive eight gears, shaft, bearing housing, etc.	1 set
3	Load Cells	QS series bridge sensor	4 sets
4	Weighing Instruments	(Configured according to customer's actual situation)	1 set
5	Large screen	3 inch	1 set
6	Digital Signal Cable	(Anti-interference signal line)	1 set
7	Junction box	4 wires	1 set
8	Drive reducers	BWE53-391 (Configured according to customer's actual situation)	1 set
9	Mud crusher	(Configured according to customer's actual needs)	1 set
10	Control box	Controls included	1 set
The main technical parameters of the chain plate feeder
Weight of the whole machine		About 7.5 tons
Maximum volume of the whole machine		10~25 cubic meters (according to different models)
Motor power		2.2~3KW (according to different models)
Conveying speed		1.2~1.8m/min (according to different models)
Maximum flow rate		Approx. 40~60 m3/hour (>50 tons/hour)
Measuring precision		Tolerance can be better than 0.5%

IV.Applicable occasions
It is suitable for weighing and batching in ceramics industry and continuous feeding in building materials industry.

FAQ

1.Do you calibrate weighbridge before shipment?
Yes,we already calibrate scale and testing all part before shipment,then it can use working directly after install.
2.How to install weighbridge and truck scales?
The detail install manual include paper manual and video manuals will be prepared together with scale.Also technical engineer can be visiting supervise install if you required,but the customer need cover related travel cost.
3.Warranty
1years for truck scale/weighbridge platform structure and component part after installation.
4.Delivery Term
We accept EXW,FOB,CFR and CIF,etc.
5.Payment Term
1).T/T
2).L/C at sight
3).Western Union,etc